Trailer Mounted Heaters
Tech 24
The Ray-Tech Tech 24 features a 4’W x 6’L heating chamber mounted on the rear of a single axle trailer.
The Tech 24 features a 6’L x 4’W heater with one single 24V blower motor mounted on a single axle trailer. This machine is the perfect size for driveways, parking lots and potholes.
- 12V Led Work Light – 12V LED work light mounted above heating chamber to extend working hours.
- LED Arrow Stik Light Bar – LED light bar with control module showing flash pattern being used.
- Aluminum Wind Guards – Set of wind guards to protect against wind or burning of nearby grass, plantings, vehicles, buildings, etc.
- One 24V blower motor.
- Battery box for 24V power system with batteries, chargers and all controls.
- Completely stainless steel heating chamber.
- Heavy duty Ray-Tech built electric winch to raise and lower chamber.
- Ray-Tech unique heating converters for fastest and most efficient heating.
- Two 100 lb propane cylinders.
- Heavy duty frame.
- LED trailer lighting throughout.
- Single 2,000 lb axle.
- Single front swivel caster wheel for added maneuverability.
- Easy lighting by turning on the blower motor and touching a torch to the converters.
- Length: 8’ 4″
- Width: 5’ 8″
- Height: 8’ 0”
- Chamber Length: 5’ 6”
- Chamber Width: 4’
- Weight (Empty): 1500 lbs
- Weight (w/ Propane): 1700 lbs
Tech 36
The Ray-Tech Tech 36 features a 3’L x 13’L bi-fold heating chamber mounted on the rear of a single axle trailer.
The Tech 36 features a 3’L x 13’W bi-fold heater with two 24V blower motors mounted on a single axle trailer. This machine is ideal for utility work or any application that requires heating across a full lane of a road.
- 12V Led Work Light – 12V LED work light mounted above heating chamber to extend working hours.
- LED Arrow Stik Light Bar – LED light bar with control module showing flash pattern being used.
- Aluminum Wind Guards – Set of wind guards to protect against wind or burning of nearby grass, plantings, vehicles, buildings, etc.
- Two 24V blower motors.
- Battery box for 24V power system with batteries, chargers and all controls.
- Completely stainless steel heating chamber.
- Heavy duty Ray-Tech built electric winch to raise and lower chamber.
- Ray-Tech unique heating converters for fastest and most efficient heating.
- Four 100 lb propane cylinders.
- Heavy duty frame.
- LED trailer lighting throughout.
- Single 6,000 lb axle.
- Single front swivel caster wheel for added maneuverability.
- Easy lighting by turning on the blower motor and touching a torch to the converters.
- Length: 15’ 6″
- Width: 7’ 4″
- Height: 7’ 10”
- Chamber Length: 3’ 4”
- Chamber Width: 13’
- Weight (Empty): 3,000 lbs
- Weight (w/ Propane): 4,000 lbs
Tech 48
The Ray-Tech Tech 48 features a 6’L x 8’W heating chamber mounted on the rear of a single axle trailer.
The Tech 48 features our largest heating chamber at 6’L x 8’W with two 24V blower motors. It is mounted on a single axle trailer. This machine is great for virtually any size repair or touch-up job.
- 12V Led Work Light – 12V LED work light mounted above heating chamber to extend working hours.
- LED Arrow Stik Light Bar – LED light bar with control module showing flash pattern being used.
- Aluminum Wind Guards – Set of wind guards to protect against wind or burning of nearby grass, plantings, vehicles, buildings, etc.
- Two 24V blower motors.
- Battery box for 24V power system with batteries, chargers and all controls.
- Completely stainless steel heating chamber.
- Heavy duty Ray-Tech built electric winch to raise and lower chamber.
- Ray-Tech unique heating converters for fastest and most efficient heating.
- Four 100 lb propane cylinders.
- Heavy duty frame.
- LED trailer lighting throughout.
- Single 6,000 lb axle.
- Single front swivel caster wheel for added maneuverability.
- Easy lighting by turning on the blower motor and touching a torch to the converters.
- Length: 12’ 6″
- Width: 8’ 0″
- Height: 8’ 7”
- Chamber Length: 6’
- Chamber Width: 8’
- Weight (Empty): 3,000 lbs
- Weight (w/ Propane): 4,000 lbs
Tech 108
The Ray-Tech Tech 108 features a 9’L x 30″W heating chamber mounted on the side of a single axle trailer.
The Tech 108 features a 9’L x 30″W heater with one 24V blower motor mounted on a single axle trailer. This machine was designed with trench heating and some joint or seam work in mind.
- 12V Led Work Light – 12V LED work light mounted above heating chamber to extend working hours.
- LED Arrow Stik Light Bar – LED light bar with control module showing flash pattern being used.
- Aluminum Wind Guards – Set of wind guards to protect against wind or burning of nearby grass, plantings, vehicles, buildings, etc.
- One 24V blower motor.
- Battery box for 24V power system with batteries, chargers and all controls.
- Completely stainless steel heating chamber.
- Heavy duty Ray-Tech built electric winch to raise and lower chamber.
- Ray-Tech unique heating converters for fastest and most efficient heating.
- Two 100 lb propane cylinders.
- Heavy duty frame.
- LED trailer lighting throughout.
- Single 2,000 lb axle.
- Single front swivel caster wheel for added maneuverability.
- Easy lighting by turning on the blower motor and touching a torch to the converters.
- Length: 13’ 2″
- Width: 7’ 3″
- Height: 7’ 4”
- Chamber Length: 9’ 0”
- Chamber Width: 30″
- Weight (Empty): 1,600 lbs
- Weight (w/ Propane): 1,800 lbs