Tow Behind Joint Heaters

Fusion AT (Automatic Tow)

The Ray-Tech Fusion AT is a trailer mounted joint heating unit featuring a 15″W x 12’L heating chamber. This is our only joint heating model that can be registered and towed down the road.

The Fusion AT features a 15″W x 12’L heating chamber mounted on a trailer frame with a single rear axle. The trailer can be registered for road use and is ideal for any size paving job from parking lots to airports and highways. There is a rear ball hitch that can allow for more than one Fusion MT to be towed in tandem on the jobsite.

None

  • One 115V blower motor.
  • Fully automatic ignition and heat sensing.
  • Propane fueled generator mounted on frame to supply power.
  • Completely stainless steel heating chamber.
  • Ray-Tech unique heating converters for fastest and most efficient heating.
  • Two 100 lb propane cylinders in rear latching rack.
  • Heavy duty steel tubing frame.
  • Flashing LED beacon light on rear.
  • Single 2,000 lb axle.
  • LED trailer lighting throughout.
  • Front swivel caster wheel on jack.
  • Adjustable jacks to control height of heater.
  • Length: 18’ 6″
  • Width: 48″
  • Height: 6′ 0”
  • Chamber Length: 12′ 0″
  • Chamber Width: 15″
  • Weight (Empty): 1,200 lbs
  • Weight (w/ Propane): 1,400 lbs

Fusion MT (Manual Tow)

The Ray-Tech Fusion MT is a trailer mounted joint heating unit featuring a 15″W x 12’L heating chamber. This is our only joint heating model that can be registered and towed down the road.

The Fusion MT features a 15″W x 12’L heating chamber mounted on a trailer frame with a single rear axle. The trailer can be registered for road use and is ideal for any size paving job from parking lots to airports and highways. There is a rear ball hitch that can allow for more than one Fusion MT to be towed in tandem on the jobsite.

None

  • One 115V blower motor.
  • Easy manual ignition with a customer supplied hand held torch.
  • Propane fueled generator mounted on frame to supply power.
  • Completely stainless steel heating chamber.
  • Ray-Tech unique heating converters for fastest and most efficient heating.
  • Two 100 lb propane cylinders in rear latching rack.
  • Heavy duty steel tubing frame.
  • Flashing LED beacon light on rear.
  • Single 2,000 lb axle.
  • LED trailer lighting throughout.
  • Front swivel caster wheel on jack.
  • Adjustable jacks to control height of heater.
  • Length: 18’ 6″
  • Width: 48″
  • Height: 6′ 0”
  • Chamber Length: 12′ 0″
  • Chamber Width: 15″
  • Weight (Empty): 1,200 lbs
  • Weight (w/ Propane): 1,400 lbs

Fusion Seamless

The Ray-Tech Fusion Seamless is the heating component of our train joint heating system. This unit features a 15″W x 12’L heating chamber on a tow behind frame.

The Fusion Seamless features a 15″W x 12’L heating chamber mounted on a tow behind frame with six wheels. The trailer is configured with ball hitches and receivers on either end to hook multiple Fusion Seamless or Fusion Reflector units end to end to form a heating train during paving.

None

  • One 115V blower motor.
  • Control panel for all heating controls.
  • Fully automatic ignition and heat sensing operation controls.
  • Propane fueled generator mounted on frame to supply power.
  • Completely stainless steel heating chamber.
  • Ray-Tech unique heating converters for fastest and most efficient heating.
  • Four 100 lb propane tanks.
  • Heavy duty steel tubing frame.
  • Flashing LED beacon light on rear.
  • Four swivel caster wheels; two on each end.
  • Two high heat resistant wheels in middle of frame for proper tracking in train.
  • Adjustable jacks to control height of heater.
  • Length: 18’ 6″
  • Width: 44″
  • Height: 39”
  • Chamber Length: 12′ 0″
  • Chamber Width: 15″
  • Weight (Empty): 2,000 lbs
  • Weight (w/ Propane): 2,400 lbs

Fusion Reflector

The Ray-Tech Fusion Reflector is the non-heating component of our train joint heating system. This unit features a 15″W x 12’L reflector chamber on a tow behind frame.

The Fusion Reflector features a 15″W x 12’L reflector chamber mounted on a tow behind frame with six wheels. The trailer is configured with ball hitches and receivers on either end to hook multiple Fusion Seamless or Fusion Reflector units end to end to form a heating train during paving. The main goal of the reflector is to hold heat down onto the asphalt just after a Fusion Seamless has passed over that area heating it.

None

  • Completely stainless steel reflector chamber.
  • Heavy duty steel tubing frame.
  • Flashing LED beacon light on rear.
  • Four swivel caster wheels; two on each end.
  • Two high heat resistant wheels in middle of frame for proper tracking in train.
  • Adjustable jacks to control height of chamber.
  • Length: 18’ 6″
  • Width: 44″
  • Height: 39”
  • Chamber Length: 12′ 0″
  • Chamber Width: 15″
  • Weight: 1,200 lbs